Spectrum Nylon PA6 Low Warp NATURAL 1.75mm 0,5kg

Filament Spectrum PA6 Low Warp - Strong and abrasion-resistant

Spectrum PA6 Low Warp is an extremely durable construction material based on polycaprolactam improved with admixtures to reduce the high shrinkage inherent to the processing of such materials. The most important characteristics of the Spectrum PA6 Low Warp filament are, among others: resistance to fuel and oils, high impact strength and very good mechanical properties.

The improved cohesiveness of the Spectrum PA6 Low Warp material allows for a significant reduction of “curling” effect (especially at the corners of the printed model). The reduction of this negative effect is related to the low processing shrinkage at the level of 0.3%.

Additives used in the production of Spectrum PA6 Low Warp make it a self-lubricating material, so it is possible to use manufactured parts in applications where friction occurs. Moreover, the printed elements will have a good electrical insulating properties and will show also physiological indifference.

To attain the very attractive properties of Poliamide Low Warp, as regards the technical aspects, you need to follow the basic storage rules for such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object, it is recommended to dry the material prior to work. 

Key features:

• low processing shrinkage 
• high mechanical strength
• chemical resistance to lubricants and oils
• wide variety of applications
• a very high adhesion between layers, which minimises the risk of delamination 

Applications:

• slide bearings, scrapers, guide rollers operating at elevated temperatures
• sealing rings and plates with increased chemical and corrosion resistance
• end-use parts
• tooling
• functional prototyping

Packaging
Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Whole product packed in the original, folied Spectrum Filaments packaging.

VERIFY YOUR SPOOL – the most precise quality control system on  the market

Filament for 3D printers is manufactured by the method of free extrusion, which is one of the most difficult processing techniques by extrusion, due to the particularly significant impact of process parameters on product dimensions and material homogenization.

During the production each 1mm of Spectrum Filament is being continuously measured in 2 axes with ±0.8µm accuracy, which allow obtaining a high-quality final product. To prove this, Spectrum Filaments, as one of the few manufacturers in the world, has introduced the possibility of online presentation, individually for each manufactured spool:

• the course of diameter on the entire length of the spool,
• mean diameter,
• ovality,
• standard deviation.

Precise survey guarantees that Spectrum Filaments products meet rigorous market requirements.