Raise3D Hyper Speed PLA 1.75mm weiß/white

Hyper Speed PLA Filament

Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers.

With optimized molecular weight and tuned flowability, Raise3D Hyper Speed PLA is capable of achieving faster melting in the hot end and much quicker cooling after the material has been extruded. As a result, the surface quality of parts printed by Hyper Speed filaments is smooth and most of the sharp details are kept. Most importantly, thanks to optimized molecular weight, Hyper Speed PLA shows excellent interlayer bonding quality and Z-direction strength. Therefore, Hyper speed PLA can be used for concept models and figures, prototyping, etc.

Please note that Hyper Speed to function correctly, the Hyper Speed Hot Ends, the Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.

•     Developed for High Speed FFF printing
•     High flowability
•     Lower heat capacity
•     Easy to print with outstanding surface finish
•     Excellent interlayer bonding

For printing models or parts with simple structures, it is recommended to use Hyper Speed PLA itself as a removable support material to save material costs.

For printing complex models or parts with partially enclosed cavities, it is recommended to use Premium PVA+ as a support material to reduce the difficulty of post-processing.