FabConstruct VC 401 3D Scanning Spray
Sublimating matting spray for better 3D scans of very dark, shiny and reflective objects.
Spray with 400 ml content / sublimating up to 1 hour
- Manufacturer: FabConstruct
- Manufacturer number: 95493
- EAN: 4260629954931
- Item number: 95493
- Availability: from stock > delivery time 1-3 working days
Reduced solvent for sensitive surfaces
The VC401 3D scanning spray contains less solvent and is therefore also suitable for sensitive surfaces such as sensitive plastics
- For small and medium-sized components
- Free from TiO2, n-hexane and adamantane
- Scan time up to one hour
- evaporates without leaving any residue after 1 to 2 hours
- No cleaning necessary
- Made in Germany
The FabConstruct VC401 scanning spray makes it possible to create an even and homogeneous spray pattern. The newly developed self-volatilizing (sublimating) 3D scanning spray VC401 is based on the proven, further optimized raw material cyclododecane.
The effective scan time is up to 1 hour.
The sublimation time (sublimation time), i.e. the time in which the spray dissolves, is around 1 to 2 hours.
These times vary depending on the environmental conditions such as the component surface, room temperature, air circulation or humidity.
The scanning spray is free from TiO2, n-hexane and adamantane. VC401 adheres to all porous and non-porous surfaces such as textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper.
Ideal for temporarily matting surfaces for optical 3D measurement technology without subsequent cleaning. Reference point marks can simply be stuck onto the treated area.
application
Sublimating high-performance scanning spray for optical 3D measurement technology
marking elements
Regulation (EC) No. 1272/2008 (CLP)
Signal word: Danger
Pictograms: GHS02, GHS07
hazard warnings
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness and dizziness.
safety instructions
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after handling.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed
P410+P412 Protect from sunlight and do not expose to temperatures above 50°C/122°F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.